Telescope jig SIKU Series K3/K6 Type 1

Description

Fitting instructions
1. Adjust the end stops with regard to the upper hinge position. The jig can now be used for both right and left hand mounting.
2. Place door into frame and use spacer blocks to create clearance as per profile manufacturer’s instructions.
3. Place telescopic serial drilling jig on the door leaf and adjust the outer drilling jigs so that the stops rest against the door at top and at the bottom (the middle drilling jig is centred automatically).
4. Clamp telescopic serial drilling jig in place and drill holes with Ø 5,0 mm drill bit.

Scope of supply
3 x drilling jigs
6 x eye bolts
1 x square rod with cable-pull action
2 x end stops
1 x drill bit Ø 5,0 mm
1 x Allen key 4 mm
6 x blind plugs
1 x fitting instruction

Note
Please indicate exact hinge type when ordering.
See also drilling jig SIKU Series K simultaneous fixing.