Telescope jig SIKU RB Type 5

Description

Fitting instructions
1. Adjust the end stops with regard to the upper hinge position. The jig can now be used for both right and left hand mounting.
2. Set the height of the sash hole on the drilling jig.
3. Place door into frame and use spacer blocks to create clearance as per profile manufacturer’s instructions.
4. Place telescopic serial drilling jig on the door leaf and adjust the outer drilling jigs so that the stops rest against the door at top and at the bottom (the middle drilling jig is centred automatically).
5. Clamp telescopic serial drilling jig in place and drill holes with Ø 5,0 mm drill bit.

Scope of supply
1 x telescopic serial drilling jig
2 x end stops
1 x drill bit Ø 5,0 mm
1 x torx wrench T30
1 x fitting instruction

Note
See also drilling jig SIKU RB simultaneous fixing.